Visioplan Specification

Description

A series of continuously hinged together panels constructed using timber frames or aluminium extruded profiles with sweep seals at top and bottom.

Support

Panels are top hung with stacking options as centre folding or end folding with floor guide.

Wall Closing

In the closed position the end panel (or in the case of a double wing, the centre panel) acts as a full height door with ‘D’ ring handles. The whole wall is flattened out, stabilised and locked in position by key operated shoot bolts on each alternate panel.

Panel Finishes

Timer framed systems are finished in high-density spray paint but choice extends to veneers, laminates, pinboard or primer sheet ready for site decoration. Aluminium framed systems are electrostatically painted white as standard, but other colours available on request. Pelmets are finished in white as standard with matching colours / finishes available on request.

Visioplan - Timber

Panel support: Top hung only
Panel thickness: 61mm
Panel height (max): Up to a maximum of 5.0metres max for Centre Hung & 3.6metres for End Hung. (Check panel weight)
Panel width (min): 300mm
Panel width (max): Centrefold - 900mm. (Check panel weight); Endfold - 700mm
Door leaf width (max): 800mm
Panel weight (max): 180kg
Glass thickness: 6mm

Visioplan - Aluminium

Panel support: Top hung only
Panel thickness: 60mm
Panel height: Up to a maximum of 5.0metres max for Centre Hung & 3.6metres for End; Hung; (Check panel weight)
Panel width (min): 300mm
Panel width (max): Centrefold - 900mm (Check panel weight); Endfold - 700mm
Door leaf width (max): 800mm
Panel weight (max): 180kg
Construction: 60 x 60mm section aluminium profile with 36 x 40mm crossrail profile (if required)
Approx weight (max): 25 kg/m² (with 6mm glazing)
Glass thickness (max): 14mm

Visioplan - Individual Panels

Panel support: Top hung on two point suspension
Panel thickness: 60mm
Panel height: Up to a maximum of 5.0metres max for Centre Hung & 3.6metres for End Hung.; (Check panel weight)
Panel width (min): 1200mm
Panel width (max): 180 kg
Construction: 60 x 60mm section aluminium profile with 36 x 40mm crossrail profile (if required)
Approx weight: 25 kg/m² (with 6mm glazing)
Glass thickness (max): 14mm
Stacking options: Please refer to page 41 for a selection of track layouts which are available.